Second hand milk cooling tanks efficiency tools

2007-06-12 08:1411-10-2013
charriau
Sales manager

Second hand milk cooling tanks efficiency tools

The following products have been developed along the years, in house, to answer specific needs concerning not so recent milk cooling tanks. Whether the functionality was missing or the OEM equipment is known for being unreliable.
These products can be used on many milk cooling tanks models and have a proven reliability track. Our main customers are the ones selling full maintenance contract and that have then no interest in doing on site interventions.

Agitation programmer

images/produits/milk-agitation-unit.jpg


The older milk cooling tanks don't always have an agitation working properly. This programer will agitate 2 mn every 13 mn (so cycle is 15 mn). Bi-tension 230 or 400 volts, 50 or 60 hertz. Wiring is simple and can be adapted to all existing milk coolers without modifying existing wiring. It is mounted outside without any additional box. Resin moulded, it is watertight and sustains over voltage when thunderstorms. Supplied with a reversible fixation.

First milking alarm

images/produits/milk-freeze-alarm.jpg

Detects first milk coming (buzzer and led) in the milk cooling tank and starts the tank 30 mn later so that the first milk does not freeze in the tank. Bi-tension 230 or 400 volts, 50 or 60 hertz. Wiring is simple and can be adapted to all existing milk coolers without modifying existing wiring. It is mounted outside without any additional box. Resin moulded, it is watertight and sustains over voltage when thunderstorms. Supplied with a reversible fixation.

Electronic temperature sensor

images/produits/milk-temperature-agitation.jpg


This sensor is especially designed to keep milk at very low temperature (around 1-2 °C) without risk of milk converting to ice. Its electronic conception stops it from going to negative temperatures. Sensor calibration is done to the relevant temperature at the assembly plant. Cable length can be adapted to the customer's need. Bi-tension 230 or 400 volts, 50 or 60 hertz. Wiring is simple and can be adapted to all existing milk coolers without modifying existing wiring. It is mounted outside without any additional box. Resin moulded, it is watertight and sustains over voltage when thunderstorms. Supplied with a reversible fixation. The right product to replace mechanical temperature sensors.

Anti freeze kit

images/produits/milk-anti-freeze-kit.jpg

During winter time, some water can stay in pumps, and then ice can damage them. This kit allows to remove 100% of that water. Kit is supplied with adaptations for different pumps and tubing size (from 40 mm to 50 mm).

Replacement feet

images/produits/foot.jpg

Stainless steel foot, length : 220 mm and diameter : 60 mm.

Valves for milk cooling tanks

images/produits/milk-tank-outlet.jpg

We can also supply you with stainless steel new or second hand valves and components for SMS, DIN, RJT and ACME standards, in diameter 51 mm (2 inches). These valves are also compatible with the Alfa Laval half-valve system.

Milk cooling tank washing system/CIP

images/produits/milk-tank-cleaning-unit1.jpg

images/produits/milk-tank-cleaning-unit2.jpg

Some washing system are notoriously inefficient. The kit we developed allows to install a good performing system on most tanks. It can be installed by a professional in 30 minutes.

Dernière modification par charriau (2009-10-13 14:43)