MilkTransfer tanks are isothermal stainless steel tanks that ensure the transport of milk in good conditions. They guarantee a stable temperature over a long period of time, are easy to install on a large number of vehicles or trailers and allow collection from different producers.
All «MilkTransfer» tanker models have a high-quality AISI 304 stainless steel double wall insulated with polyurethane foam, with respect for the environment, in order to keep the milk cold during transport (8-12 hours) without using a refrigeration unit.
The quality and surface treatment of the stainless steel as well as the washing system prevent the smallest deposit of milk, thus avoiding microbial development and alteration of the transported milk.
One or more compartments: the partitioning of the interior into one or more compartments contributes to transport safety by limiting the balance of the milk during braking and also makes it possible to separate the milk from different sources. Each compartment has its own milk drain valve.
Washing: integrated system with water circuit and ball diffuser for perfect cleaning and disinfection of the tank after each use.
Elliptical cistern : oval-shaped cistern for a low centre of gravity. Robustness and endurance to cope with the constraints of transport.
Type INTERVOL RFN-24. Two-component rigid polyurethane foam. The expansion gas used is HCFC 141b (CFC-free) Density: 40 kg/ m³ (DIN 53420) Compressive strength : 20 kPa (DIN 53421). Thermal conductivity at 24°C : 0,023 W/m°K (DIN 18164).
GAUGE RULE :
High precision stainless steel (AISI 304) gauge ruler for easy and direct reading in mm Standard measuring table (litres)
The tanks comply with EU regulation 98/37 on machine safety, have the CE mark and meet the international standards EN 292-1, EN 292-2, EN 294, EN 349, EN 418, EN 1672-1, EN 60204.
Stainless steel 18/10, DIN 1.4301, AISI 304
Easy installation on a van or truck
Horizontal elliptical type tank with one or two individual compartments. Thickness of the inner jacket: 2.00 mm.
Thickness of the outer casing: 1.50 mm.
Type of insulation: INTERVOL RFN-24. Insulation is achieved by a precise and controlled injection of environmentally friendly high density polyurethane foam. Two-component rigid polyurethane foam system. The foam blowing agent is HCFC-141b (CFC-free). Density: 40 kg/m³ (DIN53420). Compressive strength: 20 kPa (DIN53421). Thermal conductivity at 24°C: 0.023 W/m.°K (DIN18164).
Smooth inner faces, rounded corners, perfectly polished welds.
From 1 to 3 milk outlets depending on the model.
PVC screw cap DN50 with stainless steel chain.
Manhole in stainless steel AISI 304 Ø 400mm, raised to avoid any overflow, watertight.
Pre-installation for CIP (CIP) with washing tube Ø25 mm and ball diffuser.
Vent with stainless steel plug, can be used as milk inlet.
Specially designed stainless steel feet for suitable mounting on truck.
TRIPHASED STAINLESS STEEL MILK PUMP 400V/50Hz – 0,75 kW – 10 m³/h WITH SUCTION IN D.40 AND DISCHARGE IN D.25 WITH DN40
STAINLESS STEEL SINGLE-PHASE MILK PUMP 220V/50Hz – 0,75 kW – 10 m³/h WITH SUCTION IN D.40 AND DISCHARGE IN D.25 WITH DN40
STAINLESS STEEL MILK PUMP 12V – 0,37 kW – 2,6 m³/h WITH 1»1/4 SUCTION
Graduated scale for individual milk gauging supplied with a conversion table, accuracy: ± 5%.
Adapter DN50 to SMS 51 or to different thread type/size