NEW MILK COOLING TANKS

MILK COOLING TANKS

Ets CHARRIAU markets new open tanks from 50 litres to 2,000 litres, and closed tanks from 1,000 to 20,000 litres.

Whatever tank you need, you will always find the following elements: 2 blocks.

– The refrigeration part with either what is called direct expansion (direct refrigeration) or indirect expansion (refrigeration system with chilled water)

The second part is the container. A double-walled insulated tank allowing the exchange of temperature between the milk and the refrigerant.

In this same tank with a corrosion resistant composition (stainless steel, chrome, nickel and carbon) and a smooth appearance without any roughness and slightly inclined to allow the evacuation of liquids (milk, washing water), there is also a thermostat. Thanks to its location in the milk tank in the liquid mass, it must be precise. Its sensitivity must be 0.5 C° and its efficiency constant, whether the container is 10% or 100% of its capacity. In addition to these elements, the agitator. Its role is to ensure the homogenization of the temperature of the milk and a good distribution of fat Indeed, thanks to its variable rotation speed (20 to 40 revolutions per minute) and its shape, it must in no case cause splashing, foaming or churning The phenomenon of lipolysis (damage to the membrane of the fat cell) must be controlled.

milk cooling tanks
tank à lait
tank à lait

CUVE OUVERTE

tank à lait
tank à lait
tank à lait
milk cooling tanks
contact

CUVE FERMÉE CYLINDRIQUE

Tank à lait neuf elliptique fermé de 12 000 à 20 000 litres

TYPE :

Horizontal cylindrical type tank, free positioning, smooth inner surfaces, rounded corners, perfectly polished welds, adjustable feet for uneven floors Direct expansion bottom designed to ensure the complete emptying of the tank. The design of the evaporator protects milk from freezing even with small volumes. Breaking pressure at 60 bar. Operating pressure: 30 bars. Precise insulation by controlled injection of environmentally friendly high density polyurethane foam. Agitation composed of a Sirem IP55 131 W 25 rpm threephase geared motor, a one-piece seamless agitator blade (IC 1000 – IC 2500 L), a Sirem IP55 145 W 21-25 rpm threephase geared motor, one one-piece stirring blade without welding (IC 3000 – IC 6000 L), two Sirem IP 55 145 W 21- 25 rpm three-phase geared motors, two one-piece blades without welding (IC 8000 – IC 14000 L). Raised geared motors for better cleaning. Milk drain and evaporator tilting according to international patents (ISO 5708). Stainless steel ruler and standard measuring table. Stainless steel butterfly valve DN50 (for IC 1000 – IC 6000), Ø52 mm and stainless steel butterfly valve DN80 (for IC 8000 – IC 14000), Ø85 mm with male threaded end, PVC plug with stainless steel chain for all models up to 6000 litres. Manhole Ø400 mm on IC 1000 to 3000 litres, manhole Ø500 mm on IC 4000 to 14000 litres. Stainless steel ladder on all models from 2000 litres and up. Washing tube Ø25 mm with rotating diffuser for perfect washing in every corner of the tank. No ball diffuser that could be clogged by salts in the water after a period of use. External stainless steel vent to equalize the pressure.

REFRIGERATION UNIT :

Hermetic type compressor (Tecumseh Hermetic Unit, Danfoss Maneurop, Copeland scroll), refrigerant R404A, solenoid valve, voltage and phase controller (L1-L2-L3) for the protection of the electrical circuits of the tank against voltage variations, high and low pressure switches, high pressure switch for the regulation of the second fan of the cooling circuit, liquid cylinder and liquid sight glass are included for the protection and high performance of the refrigeration unit.

ISOLATION :

Type INTERVOL RFN-24. Mousse rigide polyuréthane à deux composants. Le gaz d’expansion utilisé est du HCFC 141b (sans CFC). Density: 40 kg/m3 (DIN 53420). Résistance de compression : 20 kPa (DIN 53421). Conductivité thermique à 24°C : 0,023 W/m°K (DIN 18164).

GAUGE RULE :

High precision stainless steel (AISI 304) gauge ruler for easy and direct reading in mm Standard measuring table (litres)
The tanks comply with EU regulation 98/37 on machine safety, have the CE mark and meet the international standards EN 292-1, EN 292-2, EN 294, EN 349, EN 418, EN 1672-1, EN 60204.

Adopted International Standard : DIN 8968-1986,MOD ; NF U36-101-1987 bulk milk cooler. ; GOST R 50803-1995 refrigerated bulk milk tanks. general requirements ; GOST R 50803-2008, IDT ; DS/ISO 5708-1985,IDT ; NEN-ISO 5708-1984,IDT ; UNE 68-049-82

NF EN 13732-2003 (U36-101) ; NF U36-101-2003 food processing machinery- bulk milk coolers on farms – requirements for construction, performance, suitability for use, safety and hygiene. NF U36-101-2009 food processing machinery – bulk milk coolers on farms – requirements for construction, performance, suitability for use, safety and hygiene.

milk cooling tanks
tank à lait
milk cooling tanks
milk cooling tanks

TYPE :

Washing tube Ø25 mm with rotating diffuser for perfect washing in every corner of the tank. Direct expansion bottom designed to ensure the complete emptying of the tank. The design of the evaporator protects milk from freezing even with small volumes. Breaking pressure at 60 bar. Operating pressure: 30 bars. Precise insulation by controlled injection of environmentally friendly high density polyurethane foam. Precise insulation by controlled injection of environmentally friendly high density polyurethane foam. Agitation composed of a Sirem IP55 131 W 25 rpm threephase geared motor, a one-piece seamless agitator blade (IC 1000 – IC 2500 L), a Sirem IP55 145 W 21-25 rpm threephase geared motor, one one-piece stirring blade without welding (IC 3000 – IC 6000 L), two Sirem IP 55 145 W 21- 25 rpm three-phase geared motors, two one-piece blades without welding (IC 8000 – IC 14000 L) Raised geared motors for better cleaning Milk drain and evaporator tilting according to international patents (ISO 5708). Stainless steel ruler and standard measuring table. Stainless steel butterfly valve DN50 (for IC 1000 – IC 6000), Ø52 mm and stainless steel butterfly valve DN80 (for IC 8000 – IC 14000), Ø85 mm with male threaded end, PVC plug with stainless steel chain for all models up to 6000 litres. Manhole Ø400 mm on IC 1000 to 3000 litres, manhole Ø500 mm on IC 4000 to 14000 litres. Stainless steel ladder on all models from 2000 litres and up. Washing tube Ø25 mm with rotating diffuser for perfect washing in every corner of the tank. No ball diffuser that could be clogged by salts in the water after a period of use External stainless steel vent to equalize the pressure.

REFRIGERATION UNIT :

Hermetic type compressor (Tecumseh Hermetic Unit, Danfoss Maneurop, Copeland scroll), refrigerant R404A, solenoid valve, voltage and phase controller (L1-L2-L3) for the protection of the electrical circuits of the tank against voltage variations, high and low pressure switches, high pressure switch for the regulation of the second fan of the cooling circuit, liquid cylinder and liquid sight glass are included for the protection and high performance of the refrigeration unit.

ISOLATION :

Type INTERVOL RFN-24. Two-component rigid polyurethane foam The expansion gas used is HCFC 141b (CFC free). Density : 40 kg/m3 (DIN 53420). Compressive strength : 20 kPa (DIN 53421). Thermal conductivity à 24°C : 0,023 W/m°K (DIN 18164).

GAUGE RULE :

High precision stainless steel (AISI 304) gauge ruler for easy and direct reading in mm Standard measuring table (litres)
The tanks comply with EU regulation 98/37 on machine safety, have the CE mark and meet the international standards EN 292-1, EN 292-2, EN 294, EN 349, EN 418, EN 1672-1, EN 60204.

Adopted International Standard : DIN 8968-1986,MOD ; NF U36-101-1987 bulk milk cooler. ; GOST R 50803-1995 refrigerated bulk milk tanks. general requirements ; GOST R 50803-2008, IDT ; DS/ISO 5708-1985,IDT ; NEN-ISO 5708-1984,IDT ; UNE 68-049-82

NF EN 13732-2003 (U36-101) ; NF U36-101-2003 food processing machinery- bulk milk coolers on farms – requirements for construction, performance, suitability for use, safety and hygiene. NF U36-101-2009 food processing machinery – bulk milk coolers on farms – requirements for construction, performance, suitability for use, safety and hygiene.

TANK A LAIT